Novidades

Reduce your time with Panduit’s RapidID

Reduce the time and cost of cable management documentation by up to 50 percent when implementing a new CED or needing to locate installed connectivity, or when replacing a network switch, thanks to the RapidID™ network mapping system.

Data center outages may happen, but they cost money! It is estimated that in the U.S. in the past year alone, 40 percent of data center outages cost between $100,000 and $1,000,000. RapidID uses pre-identified patch cords with unique barcodes to cut the installation hours required to complete a network mapping in half, and when less manpower is needed, the cost is lower.

See how RapidID works; download the infographic!

New Leviton Zigbee 3.0 socket

Leviton has introduced the new Zigbee™ 3.0 socket. The Zigbee controlled socket (ZSTLR-1HW) is compatible with a Leviton wireless controller or compatible with third-party Zigbee 3.0 to provide load control of the wireless socket.

Can be used with lamps, appliances and similar devices up to 15 A in wireless applications that require socket control or plug load control

“The Zigbee 3.0 controlled outlet brings new opportunities to our line of commercial wireless lighting control,” said Tom Leonard, vice president of Leviton. “It eliminates the pain point of pulling new cables to meet IECC, ASHRAE 90.1 requirements Users can easily install the outlet in place of traditional wall outlets and use the app to complete the configuration. Zigbee uses mesh networking technology to provide fast, reliable and secure communications.

The Zigbee controlled socket is Zigbee 3.0 certified and requires a Leviton environment controller to operate. It works in conjunction with the GreenMAX DRC wireless keypad room controller, Lumina RF wireless keypad room controller or a Zigbee 3.0-compatible hub, gateway or controller with proper integration.

The upper outlet of the socket is always on and the lower outlet is controlled. The outlet control strategies use occupancy detection or program-based control to energize and de-energize a controlled outlet based on occupancy or time of day. There is also an LED light that indicates when the controlled switch is on or off.

The Zigbee controlled receptacle is tamper-proof (TR) and meets NEC 2020 code requirements. The socket can be used as a component in a system to meet energy code requirements for IECC, ASHRAE 90.1, dimming, manual on/off, presence/absence control, and automatic shutdown .

Reduce your time with Panduit’s RapidID

Reduce the time and cost of cable management documentation by up to 50 percent when implementing a new CED or needing to locate installed connectivity, or when replacing a network switch, thanks to the RapidID™ network mapping system.

Data center outages may happen, but they cost money! It is estimated that in the U.S. in the past year alone, 40 percent of data center outages cost between $100,000 and $1,000,000. RapidID uses pre-identified patch cords with unique barcodes to cut the installation hours required to complete a network mapping in half, and when less manpower is needed, the cost is lower.

See how RapidID works; download the infographic!

Are you ready for the school of the future?

The PNRR for Schools aims to accelerate the digital transition process of Italian schools in all different dimensions and align it with the priorities of the European Union.

Investment 3.2 “School 4.0 – Innovative Schools, New Classrooms and Laboratories” provides €2.1 million in funding for the transformation of 100,000 classrooms into innovative learning environments and the creation of laboratories for the digital professions of the future, in synergy with the €900 million in REACT EU structural funds currently being implemented for the wiring of school buildings and the educational and administrative digitization of schools.

2.1 million for transformation

The NRP’s “School 4.0” investment line involves all state schools and aims to transform the environments where curricular teaching takes place (at least 100,000 classrooms) with advanced digital equipment and to equip schools in the second cycle of education with advanced laboratories for learning the digital professions of the future.

Reduce your time with Panduit’s RapidID

Reduce the time and cost of cable management documentation by up to 50 percent when implementing a new CED or needing to locate installed connectivity, or when replacing a network switch, thanks to the RapidID™ network mapping system.

Data center outages may happen, but they cost money! It is estimated that in the U.S. in the past year alone, 40 percent of data center outages cost between $100,000 and $1,000,000. RapidID uses pre-identified patch cords with unique barcodes to cut the installation hours required to complete a network mapping in half, and when less manpower is needed, the cost is lower.

See how RapidID works; download the infographic!

New Leviton Zigbee 3.0 socket

Leviton has introduced the new Zigbee™ 3.0 socket. The Zigbee controlled socket (ZSTLR-1HW) is compatible with a Leviton wireless controller or compatible with third-party Zigbee 3.0 to provide load control of the wireless socket.

Can be used with lamps, appliances and similar devices up to 15 A in wireless applications that require socket control or plug load control

“The Zigbee 3.0 controlled outlet brings new opportunities to our line of commercial wireless lighting control,” said Tom Leonard, vice president of Leviton. “It eliminates the pain point of pulling new cables to meet IECC, ASHRAE 90.1 requirements Users can easily install the outlet in place of traditional wall outlets and use the app to complete the configuration. Zigbee uses mesh networking technology to provide fast, reliable and secure communications.

The Zigbee controlled socket is Zigbee 3.0 certified and requires a Leviton environment controller to operate. It works in conjunction with the GreenMAX DRC wireless keypad room controller, Lumina RF wireless keypad room controller or a Zigbee 3.0-compatible hub, gateway or controller with proper integration.

The upper outlet of the socket is always on and the lower outlet is controlled. The outlet control strategies use occupancy detection or program-based control to energize and de-energize a controlled outlet based on occupancy or time of day. There is also an LED light that indicates when the controlled switch is on or off.

The Zigbee controlled receptacle is tamper-proof (TR) and meets NEC 2020 code requirements. The socket can be used as a component in a system to meet energy code requirements for IECC, ASHRAE 90.1, dimming, manual on/off, presence/absence control, and automatic shutdown .